How To Repair Rip In Car Cover

How to Repair a Car Cover

by Louise Harding

tarp on car image past Dank Van Rank from Fotolia.com

Auto covers are synthetic of vinyl, material or leather. Considering covers are exposed to the elements, wear and tear from wind, lord's day and rain can cause holes and rips to develop. Automotive and material stores offering materials intended for repairing vinyl and leather; and fe-on patches tin can be applied below fabric covers without external visibility. If your cover has extensive damage, information technology may be time to purchase a new cover to ensure your vehicle is properly protected.

Repairing Vinyl Auto Covers

Step i

Measure out the rip to be repaired. Cut the vinyl patch 1 inch longer and wider than the damage being repaired.

Step 2

Plow the cover inside-out so you're looking at the cover's interior. Spread the section to be repaired flat. Cascade alcohol onto a cotton brawl until damp. Make clean the area effectually the rip. Let to dry.

Remove the backing from the adhesive vinyl patch. Centre the patch over the harm. Press the patch onto the comprehend. Firmly rub the patch to bail the adhesive and the vinyl. At that place are many brands of adhesive repair patches. Co-ordinate to Car Covers 4 Less, agglutinative vinyl patches repair harm easily and are water-resistant. Purchase patches at automotive, pool and discount stores.

Repairing Leather Machine Covers

Step ane

Use fine grit sand paper to lightly rub the edges of the rip in the leather embrace.

Step 2

Pour alcohol onto a cotton ball until the cotton wool is damp. Clean the surface area to be repaired. According to Leather Magic, always test the alcohol on an camouflaged place on the cover earlier cleaning. Some dyes come off when exposed to booze.

Step 3

Measure your harm. If the hole or rip is wider than 1/iv inches, patch information technology from the underside and and so fill in the missing leather. If the rip or hole is less than 1/4 inches broad, proceed to Footstep 5. To patch from beneath, plow the leather cover inside-out. Spread the damaged portion flat. Apply a vinyl repair patch following the steps in Department 1. Plough the car cover right-side out.

Step four

Cut a leather scrap to the same proportions as the interior of the pigsty. Insert the fleck into the gap.

Step 5

Spread the leather repair solution, aforementioned color as the cover, over the rip/pigsty or inserted leather fleck by squeezing the solution tube or container. Remove the patch beneath one time the leather solution dries if desired.

Allow repair solution to dry for well-nigh vi to 12 hours or according to the manufacturer's instructions. Leather repair solutions can be purchased at automotive, fabric, leather, craft and discount stores.

Repairing Cloth Car Covers

Step ane

Plough the fabric cover inside-out. Place the damaged surface area flat on peak of an ironing lath.

Stride 2

Measure the damage. Cut an iron-on fabric repair patch 1 inch longer and wider than the rip or hole to be patched.

Place the repair patch, adhesive side downwardly, onto the damaged expanse. Prepare the fe according to the repair patch manufacturer's recommendations, and iron the fabric patch to the car cover. Press harder on the edges to encourage a practiced bail with no curling. Turn the car encompass right-side out.

References

Things You'll Need

Writer Bio